Skip to product information
1 of 1

Sintered Polishing Laps for the CutKit® (6 inch laps) (Copy)

Sintered Polishing Laps for the CutKit® (6 inch laps) (Copy)

Regular price $400.00 USD
Regular price Sale price $400.00 USD
Sale Sold out
Shipping calculated at checkout.

Low stock: 1 left

Quantity

These are cutting and polishing laps for the CutKit®.

Sintered laps have a high concentration of diamond mixed with bronze in a thick layer.  They last basically forever--they are less aggressive than a topper of the same grit and leave a smoother finish.

Note the sintered laps are thicker than our other laps but the center of the lap is actually thinner.  Each lap comes with a spacer to allow the lap nut to lock it in place, plus a flexible plastic sheet with two clips--this can be clipped onto the machine's water shield to reduce the extra spray caused by how thick the sintered laps are.

The 100 grit sintered lap is good for rough cutting, but cuts more like a 240.  The 600 is great for final placement of facets and leaves an excellent surface for a fast prepolish.  These laps can glaze over time and slow down (particularly when cutting large moissanites!)--I have run a 1000 grit whetstone over mine while spinning with a good water drip and that rapidly brought it back to its original speed.

View full details